Broken Laptop Screens are Not Usually Hard to Replace

Published: 19th January 2012
Views: N/A

Often a laptop owner will know immediately if the screen has become damaged as the laptop display screen will either be completely unusable or impaired by cracks, marks, hue shifts or perhaps no image at all.

When you have dropped or sat on top of your laptop and the screen is obviously cracked then you can be certain that it requires replacing. On the other hand, the laptop display screen may possibly look un-damaged but either doesn't display the whole picture correctly or is completely missing then the display screen may or may not be faulty. You ought to further investigate the reason ahead of replacing the screen.

Once you've made a decision that the display screen has to be exchanged you must purchase the proper size and model type. This isn't as simple as it may sound, because there are thousands to choose between. The only way to be certain which display is necessary is to locate the precise make and model information that are always situated on the back of the old screen. If you fit the incorrect or equivalent model then it may well not work at all or might generate a graphic that will not fit correctly on screen.

To remove the old broken display screen you will firstly have to eliminate the display surround (frame). Six to eight anchoring screws situated behind vinyl or rubberized covers normally secure this. A number of manufactures in addition to using anchoring screws to hold the bezel use double-sided sticky adhesive tape making removal quite hard. Thankfully, it does not matter should you further damage the old display screen but you mustn't crack or ruin the frame. A few laptop makers make elimination more challenging as you have to remove the palm rest as the lower portion of the bezel is attached under it. Above all, before starting removal of the bezel look to see how it is attached as if you omit to take out a securing screw it would probably result in breakage.

After the frame has been removed you can unscrew the display screen from the hinges, there are usually a number of small centre point anchoring screws. You can now take off the data connection from the display, take care though as there is often a piece of tacky tape holding it in position. You must pull the connector, not the wire, employing fingertip pressure. If you break the connection or draw, some of the wire connections out of it then the complete wire will then want swapping. For present day screens, this completes the removal, but the earlier screens with a cold cathode fluorescent bulb employ a additional connector to clear away from the inverter. This quickly pulls away.

It should not be a challenge to add the brand new display. One of the most probable mistake may be to apply a lot of pressure in reinserting the screen cord or pushing the bezel into position. If you do use excessive force when adding the bezel the screen is likely to crack or get strange shadow effects. When screwing the frame in position take care not to slide with the screw driver and marking the display.

Updating a laptop screen is generally simple given you have the appropriate tools and are quite delicate when touching and adding the brand new screen.

Graham Kelly is a seasoned writer with many years experience with restoring damaged laptops. He's been in the electronic digital and computing industries for the majority of his working life and may be contacted at Trilogic uk ltd click laptop repair or USB restore.

Report this article Ask About This Article


Loading...
More to Explore